List-Magnetik GmbH

Mobile and stationary demagnetizers

Portable Demagnetizing Device HE-10

for demagnetizing of steel parts

portable_demagnetizing_device_he-10.jpg

Mobile hand demagnetizer

With the Portable Demagnetizing Device List-Magnetik HE-10, you can easily access even hard-to-reach places. For demagnetizing machine parts, tools, rotating parts, cutting plates, etc., simply pass the device over the magnetized objects and then slowly remove it. It has a 230 V AC connection and produces an alternating magnetic field of 50 Hz with sufficient field strength for the demagnetization of alloyed steels.

Technical Data Portable Demagnetizing Device HE-10

Dimensions: 120 x 120 x 135 mm
Weight: 3.5 kg
Active Pole Surface: 50 x 40 mm
Field Strength: 300 A/cm outer, 170 A/cm center
Power consumption: approx. 10 W
Power Supply: 230 V - 50 / 60 Hz
Operating temperature: approx. 50 °C

Portable Demagnetizing Device HE-20

for demagnetizing of steel parts

portable_demagnetizing_device_he-20.jpg

Depending on requirements, mobile or stationary demagnetizer

The Portable Demagnetizing Device List-Magnetik HE-20 can be used either mobile or stationary, as required. The portable device demagnetizes machine parts, tools, rotary parts, cutting plates and much more. It has a 230 V AC connection and produces an alternating magnetic field of 50 Hz with sufficient field strength for the demagnetization of alloyed steels.

In addition to mobile use, you can also use the HE-20 as a desktop device. In doing so, carry the objects to be demagnetized over the device and then slowly remove them.

The HE-20 is also suitable for installation under a conveyor belt, whereby the parts are moved over the device.

Technical Data Portable Demagnetizing Device HE-20

Dimensions: 1360 x 280 x 95 mm
Weight: 12 kg
Active Pole Surface: 200 x 20 mm
Field Strength: 350 A/cm outer, 200 A/cm center
Power consumption: 35 W
Power Supply: 230 V - 50 / 60 Hz
Operating temperature: approx. 50 °C