Layer thickness measurement in tubes and interiors

Solution 1: TOP-CHECK FE-1000 with telescope set

If you have to measure layers that are difficult to access, we have an excellent solution for you with TOP-CHECK FE-1000, the TOP-CHECK telescope set and the TOP-CHECK app for Android.

For example:

Measurement of the enamel layer in a steel boiler
Measurement of the underbody coating under a vehicle
Measurements above head height
Measurements beyond arm's length

With the TOP-CHECK telescope set, you can extend your arm by 1.70 meters and set any angle up to 180 degrees. The TOP-CHECK FE-1000 coating thickness measuring device allows you to place it gently on the coating and forgives you if you cannot position it exactly vertically - the measurement is still exact. The measured value can be transferred immediately to your Android mobile device via the Bluetooth interface, so that you can read and hear what your measurement has shown there.

schichtdickenmessgeraet_top-check_fe-1000_teleskop-set-1.jpg

Coating thickness measuring device TOP-CHECK FE-1000 with telescope set

Angled measurement, device display is not visible, data is displayed and announced on the mobile device

Solution 2: MEGA-CHECK with magnetic inductive measuring probe PF-30 and telescopic rod

Do you have to measure the thick inner coating of a steel pipe? We have a special solution for this. With a probe PF-30, which is attached to a telescopic rod 3.1 meters in length, self-aligning.

When the telescopic rod is immersed in the tube, the probe is placed on its two poles and measures layers up to 30 mm. The probe cable is safely guided in the telescopic tube. The MEGA-CHECK coating thickness measuring device is attached to the telescopic tube with a bracket so that you have both hands free to maneuver the telescopic rod.

The device and probe can also be used without the telescopic rod.

schichtdickenmessgeraet_mega-check_sonde_pf-30_teleskopstab-3.jpg

Coating thickness probe PF-30, self-aligning, mounted on the telescopic rod

Measurement on the partially extended telescopic rod, coating thickness measuring device MEGA-CHECK in the holder