List-Magnetik GmbH

Ferrite content meter FERRITE-CHECK 140


 

Ferrite content meter FERRITE-CHECK 140

Ferrite content meter FERRITE-CHECK 140

for ferrite content measurement in austenitic and duplex steels

ferrite_content_meter_ferrite-check_140.jpg

 

Ferrite content measurement kept simple

The List-Magnetik FERRITE-CHECK 140 ferrite content meter is a compact and handy device with an integrated probe for measuring the ferrite content in austenitic and duplex steels according to the Basel standard DIN EN ISO 8249 using the magnetic induction method.

 

Display of the ferrite content via OLED display

With a single button and the self-explanatory multilingual menu navigation, the ferrite content meter is very easy to use. The illuminated and high-contrast OLED display shows the measurement in FN and Fe%.

Measure ferrite content in welds

Especially for welded duplex steels, a ferrite content measurement is important to know, if the weld has enough ferrite content to guarantee the strength of the weld. If there is insufficient heat input or cooling in the weld area, the ferrite content may be too low.

Fast and continuous ferrite content measurement

With FERRITE-CHECK 140, the ferrite content can be determined very accurately and quickly. To detect the weld seam on smooth or polished surfaces, the instrument can be switched to fast continuous measurement. When the probe is placed on the surface and moved along the surface, measured values are continuously stored and, after the probe is lifted off, the statistics consisting of the minimum, maximum and average values of the series of measurements are displayed.

Calibrating the ferrite content meter

The FERRITE-CHECK 140 ferrite content meter is supplied with 3 calibration standards traceably calibrated to the NIST standard.


 

Manage and send measurement data with a free application

 

To further process your measurement data, you can pair your measuring device with mobile Android and iOS devices. Or you communicate with a Windows PC. This is made possible by Bluetooth Low Energy technology (BLE). With the Lima Connect app you can manage projects and assign the measuring points on a photo. The measurement results can be statistically evaluated and displayed graphically. The app for Android, iOS and Windows is free.


Service tool

The free Windows app Lima Service is available on our homepage. You can use it to set the time on your device that will be used during data transfer.

If there is a malfunction of the device, you can read data from the device, which will help our technicians in telephone support to analyze it. Thus, we may be able to remedy the situation without you having to send in the device and lose time.

The application runs on Windows 10 and Windows 11. Older Windows versions are not tested.

 

Technical data Ferrite content   meter FERRITE-CHECK 140

Application:

Measurement   of ferrite content in austenitic and duplex steels

Measuring   range:

1   - 100 Fe%
  1 - 140 FN

Measuring   method:

Single   measurement or continuous measurement with averaging

Smallest   measuring area:

ø   2 mm

Resolution:

until   10: 0.01, above 10: 0.1

Ambient   temperature:

0   - 50 °C

Display:

illuminated   high-contrast graphic OLED display

Menu   navigation:

English,   German, French, Italian, Spanish, Hungarian, Polish, Dutch

Data   logger:

4000   measured values flexibly divisible

Statistics:

count   / maximum / minimum / average / standard deviation

Interface:

Bluetooth   Low Energy interface for communication with Android, iOS and Windows

App   for Android, iOS, Windows:

free   of charge via Google Play Store, Apple App Store, List-Magnetik website

Power   supply:

1x   1.5 V AA Mignon

Operating   time:

approx.   30 hours

Dimensions:

Ø   28 x 94 mm

Weight:

72   g (with battery)

 Scope   of supply:

FERRITE-CHECK   140 with   3 calibration standards, USB Bluetooth receiver, spare battery and case,   including calibration certificate